As I was trying to find my way around building Ångstrom using OpenEmbedded, I stumbled upon as minimalistic systemd-image recipe for the Beaglebone. It boots up a usable system in less than 5 seconds.
Month: June 2012
Arduino controlled differential pan/tilt drive
An Arduino Duemilanove controlling a differential azimuth/elevation drive. The stepper motor interface is two EasyDriver boards.
Using the Logitech C920 webcam with Gstreamer
You may already know about my existing enthusiasm for Logitech webcams, which is due to the combination of relatively good image quality, high resolution and easy to use UVC interface. I was therefore very happy to learn about their newest camera, the HD Pro Webcam C920, which in addition to the standard HD webcam stuff we already know from the C910, also provides hardware encoded H.264 video stream! This is rather new and there isn’t much software that can take advantage of it; however, with a little tweaking and hacking we can get the H.264 stream into Gstreamer, where after we can do pretty much whatever we want.
Gqrx with RTL-SDR and UHD support
Support for RTL2832U-based DVB-T dongles and USRP devices from Ettus Research is now available in the Gqrx source code repository.
Support for RTL2832U-based DVB-T devices is available via the rtl-sdr and gr-osmosdr libraries. This also provides support for Ettus Research USRP’s if the gr-uhd package has been installed prior to compiling gr-osmosdr. A complete build from scratch that would support all hardware devices would thus include the following steps: